MMC D-2401-2 - User Manual

Summary

Section II: Introduction to Gauging Tape System

Section I: Gauging Tape Specifications

1.1 Linear Accuracy Specification

1.2 Gauging Tape Special Features

Section V: Operation of the Gauging Tape

5.1 Hub Cover Panel Controls and Features

Guides users through the controls and features on the tape reel hub cover panel.

5.2 Ullage and Interface Measurement Procedure

Explains the procedure for taking ullage and interface measurements.

5.3 Temperature Measurement Procedure

Section VI: Care and Maintenance of Gauging Tape

Section VII: Gauging Tape Calibration Procedure

7.1 Ullage Calibration

Details calibration procedures specific to ullage measurements.

7.2 Temperature Sensor Calibration

Explains the process for calibrating the temperature sensor.

Section VIII: Gauging Tape Replacement

Section IX: Hub Cover and PC Board Replacement

Section X: Gauging Tape Fault Finding and Troubleshooting

Appendix: Approvals and Lists

Product Warranty Information

Guideline for Tape Repair

MMC D-2401-2 Specifications

General

Model	D-2401-2
Display	LCD
Power Supply	9V battery
Type	Digital Multimeter
Operating Temperature	0°C to 40°C