1.1 LINEAR ACCURACY SPECIFICATION:
MMC PORTABLE ELECTRONIC GAUGING TAPE
STANDARD PRODUCTION
LINEAR MEASUREMENT ACCURACY
Applicable Equipment: MMC Models D-2401-2 (Trimode),
D-2401-2UI (Ullage/Interface,
D-2401-2UT (Ullage/Temperature)
Tape Lengths: 50 FT., 75 FT., 100 FT, 120 FT and
15 Meter, 25 Meter, 30 Meter 37 Meter
Basic Gauging Tape Style: Steel, 0.375 wide x 0.006 thick,
yellow or white faced, black and red
graduation markings. Manufactured in
accordance with Federal Specification
GGG-T-106F.
System Linear Accuracy at 68°F: English Reading, ±1/8" of reading
plus ± 0.01% of total tape length.
Metric Reading, ±3MM of reading
plus +/- 0.01% of total tape length.
GENERAL STATEMENT OF LINEAR ACCURACY
MMC warrants that the above listed, newly produced equipment models, incorporating the listed basic gauging tape
style and lengths, will perform to the stated system accuracy.
Certification of accuracy for new equipment is available at extra cost. Certification cost to standards of accuracy
more precise than the stated system accuracy will be quoted upon request.
Page 2
To Next Page
Loading...
