MOA A010 - Troubleshooting Noise and Error Codes; Excessive Noise Troubleshooting; Error Code Diagnostics (E0-E2)

Portable Airconditioner - English manual
24
EN
Symptom: Excessive Noise
Inspection:
1. Check if the unit is securely positioned.
2. Check if any loose, vibrating parts.
3. Noise sounds like water owing.
Solution:
1. Place the unit on horizontal and rm ground.
2. Secure and tight the parts.
3. Noise comes from owing refrigerant. This is normal.
---
Symptom: Error Codes (E0)
Inspection:
1. Communication faults between main PCB and display PCB.
Solution:
1. Check the wire harness of the display PCB for damage.
---
Symptom: Error Codes (E1)
Inspection:
1. Ambient temperature sensor failure
Solution:
1. Check connection or replace it. To clean or replace the temperature
sensor.
---
Symptom: Error Codes (E2)
Inspection:
1. Coil temperature sensor failures.
Solution:
1. Check connection or replace it. To clean or replace the temperature
sensor.