EasyManua.ls Logo

MOA A010 - Troubleshooting Error Codes (Ft); High Condensate Water Level Alarm; Long-Term Storage Guide; Storage Preparation Steps

MOA A010
105 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Portable Airconditioner - English manual
25
EN
Symptom: Error Codes (Ft)
Inspection:
1. Condensate water high level alarm.
Solution:
1. Empty the drain pan by removal the rubber plug.
STORAGE
Long-Term Storage - If you will not be using the unit for an extended
period of time (more than a few weeks) it is best to clean the unit and
dry it out completely. Please store the unit per the following steps:
1.Unplug the unit and remove exhaust hose and window kit store with
the unit.
2.Drain the remaining water from the unit.
3.Clean the lter and let the lter dry completely in a shaded area.
4.Collect the power cord at the water tank.
5.Re-install the lter at its position.
6.The unit must be kept in upright position when in storage.
7.Preserving the machine in ventilating, dry, non- corrosive gas and
safe place indoor.
ATTENTION:
The evaporator inside the machine has to be dried out before the unit
is packed to avoid component damage and molds. Unplug the unit
and place it in a dry open area for days to dry it out. Another way
to dry the unit is turn on the machine, adjust it to low-wind ventilation
mode, and maintain this state until the drainage pipe becomes dry,
so as to keep the inside of the body in a dry state and prevent it from
mildewing.

Related product manuals