Press the "ALARM" button once or press and hold down the
"ALARM" button for two (2) seconds to save and exit alarm setting
mode.
2.
3.
4.
5.
To cancel setting change, wait a few seconds for alarm setting mode to
end automatically.
To delete current alarm settings, press and hold the
"CLOCK" button while in alarm setting mode until is shown on
the display screen.
Setting the Alarm Tone & Volume
Press and hold the "ALARM" button for three (3) seconds to select
alarm tones. On-screen alarm tones are displayed as A, B, and C.
Press and hold the "-" button for three (3) seconds to change
volume levels.
1.
2.
11
NOTE: Volume level is represented by On-Screen "speaker" symbol.
Alarm A: 20 seconds of continuous beeping, followed by 10 seconds
of silence, then 20 seconds of continuous beeping as the pattern
repeats.
Alarm B: Three sets of three beeps. The beeps will stop for 7
seconds, and then resume beeping, as the pattern repeats.
Alarm C: One (1) beep every 3 seconds.
The three (3) alarm tones have distinct beeping patterns:
To Next Page