Mobicool AC/DC Cleaning and maintenance
11
Coolers with the additional heating feature
➤ Push the switch on the control panel to HOT or COLD to switch the cooler
on.
✓ The indicators on the control panel show you the operating mode:
✓ The cooler starts cooling/heating the interior.
➤ To switch off the cooler, push the switch on the control panel from HOT or
COLD to the OFF position.
6.4 Connecting to vehicle power
I
7 Cleaning and maintenance
!
A
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
Operating display Operating mode
Red Heating
Green Cooling
NOTE
If you connect the cooling device to the vehicle power, remember
that you may have to turn on the ignition to supply it with power.
WARNING!
Always disconnect the device from the power supply before you
clean and service it.
NOTICE! Risk of damage
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
Mobicool-AC-DC--O-16s.book Seite 11 Montag, 8. Januar 2018 6:11 18
To Next Page
Loading...
Need help?
General
