EVA System: User Guide
19
Technical Product Overview
Before initial set up of the EVA System, check for damage on the outside of the
transport packaging, the device, and any accessories. Please check all
components received against the parts list of components section to verify a
complete set. If parts are missing, please notify MobileODT. The EVA System
always includes the following items:
1. The colposcope body
2. The lens
3. The upper and lower phone brackets*
4. The neck strap: provided to aid with the usability of the device, for ease of
carrying and for use as a supplementary fulcrum. It can support the weight of
the colposcope while the user uses his or her hands for other aspects of
providing care and it can be used as a support to help stabilize the camera
while it is being held by the user’s hands.
5. The mobile application
6. The web portal
7. User guide
*The device does not include the Smartphone. Phones that are compatible with
this device include the Moto G2, Moto G3 and Samsung J5.
Illumination
Illumination of the EVA System is provided through a LED light-source found on
the body of the device. It has been designed to transmit no heat or electricity,
and to be comfortable for touch during a normal, 10-minute session. It includes:
x Three 16850 LiOn 2600Mh batteries + protection circuit.
x Two 350 mA LED drivers (700 mA)
x ON/OFF switch
x Micro USB charging circuit 5V input (1.5A - 2A Max)
The 3W LED is operated at 2.5W providing ~230 Lux of luminous flux at a beam
angle of 15 degrees.
To Next Page
Loading...
