Do you have a question about the Mobiltech MobilSat and is the answer not in the manual?
Key safety guidelines for proper use and installation of the MobiSat system, including precautions for installation work and proper use.
Covers proper installation, adhesive sealant use, and road traffic licensing regulations for vehicle mounting.
Details the compliance of MobilSat with relevant electromagnetic compatibility and safety regulations.
Lists the contents of the package and instructions for unpacking and keeping packaging material.
Guides on selecting the mounting position, external unit space requirements, and installation steps.
Instructions for passing cables through the roof and installing them inside the caravan.
Details on providing adequate 12V power supply, cable specifications, and notes for trailer power.
Information on the protection circuit for automatic retraction and cabling between control and command units.
Guidance on connecting the antenna system to the satellite receiver using the F-connector cable.
Provides general notes on system operation, satellite management, automatic saving, and beeper signals.
Describes the touch screen control panel and how functions are activated via its interface.
Explains how to switch on/off, perform automatic and manual satellite search, and adjust pointing.
Details on accessing the installer menu, changing satellite lists, and updating pointing parameters.
Guide to manual LNB re-positioning for optimal signal reception based on geographical location.
Presents a table of available satellites and information on customizing the installer menu.
Lists common system failures, their causes, and possible solutions for power, search, and signal issues.
Provides key technical specifications including power supply, consumption, and weight of the system.
Contains producer information, contact details, and placeholders for retailer stamp and serial number labels.