18/128
T25 System Manual Part 2: Overview Of Application Scenarios
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
1.2.3 Multiple Door Stations
You can also use multiple networked door stations to secure the main and side entrances
of a house. To do so, select one of the door cameras as the master T25. This camera will
be in charge of the Auto Configuration for all door stations and remote stations.
For system startup, carry out the Auto Configuration for the selected T25 device (and for this
device only) once you have set up the network and ensured that all system components
are supplied with power (see Section 2.1).
Then you must set up each individual KeypadRFID as described in Section 2.2 (by entering
a Super PIN and adding cards). The numbers for each door station (Super PIN, personal
number, transponder number and contact number) must be identical to the numbers for
the master T25 device. We recommend using the same admin card to set up all of the
door stations in the house or building.
Note
In order to erase a card that has been set up on multiple KeypadRFIDs from the system
(for example, if it is lost or stolen or if the user has moved away), the card must be
erased on all KeypadRFIDs.
Outdoors Indoors
Master door
station (*201)
VoIP videophone
(*102)
VoIP videophone
(*101)
DSL router
(DHCP server)
Door station
(*202)
PoE switch
VoIP videophone
(*103)
* KeypadRFID soon
to be released as
standalone solution
To Next Page
Loading...
