Seismic Shift JFET Boost
SEISMIC
SHIFT
SEISMIC
SHIFT
Copyright © 2021 by modelectronics.com
The Seismic Shift is a JFET boost based on one of the earliest effects to ever be
used on stage. This pedal adds subtle color to a guitar's sound while
maintaining the natural tone of the guitar. It packs a serious punch that can cut
through any mix when soloing or whenever some extra “umph” is required. The
Seismic Shift pairs nicely with amps and other pedals. Place it ahead of tubes,
preamps, overdrives, distortions, and fuzz pedals to shift your gear onto a new
level.
The Seismic Shift pedal kit is the introduction to the Nexus Series from Mod
Electronics. This series features a PCB base rather than the Mod Electronics’
traditional point-to-point wiring kits to offer builders an even wider variety of
effects to build. The Seismic Shift kit is designed for all skill sets and is the
perfect first build for those unfamiliar with PCB construction.
The pedal operates on both 9VDC and 18VDC. A center negative power supply
is required for use (not included w/ kit). There is no battery connection. When
using 9VDC the pedal draws 8mA. When using 18VDC the pedal draws 16mA.
The enclosure size is a standard 1590B (4.4" x 2.4" x 1.2").
To Next Page
Need help?
General
