TABLE OF CONTENTS
TOOL LIST ………………………………………………………………………………………...2
PARTS LIST DRAWINGS………………………………………………………………………….3, 4
FINAL ASSEMBLY REFERENCE DRAWING……………………………………………………5
SOLDERING TIPS ………………………………………………………………………………..6
STEP BY STEP ASSEMBLY INSTRUCTIONS ………………………………………………..7
Section 1 – Mount ¼” Jacks and Terminal Strip Components...……………………………..7
Section 2 – Mount the Potentiometers, Footswitch, LED and DC Power Jack………………8
Section 3 – Mount the Tube Socket, Shield and 5 Lug Terminal Strips & Toggle Switch…..9
Section 4 – Connect the DC Power Components …………………………………………10
Section 5 – Wiring Connections in the Vacuum Tube Section ……..…………………….10
Section 6 – Mounting Components in the Vacuum Tube Section …………………………..11
Section 7 – Wire the Output Jack and Footswitch Connections .…………………………..12
Section 8 – Finishing Up …………………………………………………………………….12
Suggested Tube Uses ..........................................................................................................................13
ASSEMBLY DRAWINGS (6 Drawings) ……………………………………………..13 – 16
These are the last 4 pages. They may be separated and used as a reference to help assemble the kit
correctly.
2
TOOL LIST
Wire Strippers
Needle Nose Pliers
Cutting Pliers
Desoldering Pump
Solder (60/40 rosin core)
Soldering Station
Phillips Head Screwdrivers
Slotted tip screwdrivers (3 mm tip)
Channellock Pliers (or similar type)
Ruler
Hobby Vise (or other means to secure box while working)
To Next Page
Loading...
