TABLE OF CONTENTS
TOOL LIST …………………………………………………………………………...2
PARTS LIST DRAWINGS………………………………………………………….3, 4
FINAL ASSEMBLY REFERENCE DRAWING………………………………………5
SOLDERING TIPS …………………………………………………………………...6
STEP BY STEP ASSEMBLY INSTRUCTIONS ………………………………7 - 12
Section 1 – Mount ¼” Jacks and Terminal Strip Components ……...………...7
Section 2 – Mount the Potentiometer, Footswitch and DC Power Jack …..…...8
Section 3 – Connect the 5KL Potentiometer …………………………………...9
Section 4 – Mount the Tube Socket, Shield and 5 Lug Terminal Strips ……...9
Section 5 – Connect the DC Power Components ……………………………10
Section 6 – Wiring Connections in the Vacuum Tube Section ……..……….10
Section 7 – Mounting Components in the Vacuum Tube Section …………….11
Section 8 – Wire the Output Jack and Footswitch Connections .…………….12
Section 9 – Finishing Up ………………………………………………………12
ASSEMBLY DRAWINGS (9 Drawings) ………………………………13 – 17
These are the last 5 pages. They should be separated and used as a reference to help
assemble the kit correctly.
2
TOOL LIST
Wire Strippers
Needle Nose Pliers
Cutting Pliers
Desoldering Pump
Solder (60/40 rosin core)
Soldering Station
Phillips Head Screwdrivers
Slotted tip screwdrivers (3 mm tip)
Channellock Pliers (or similar type)
Ruler
Hobby Vise (or other means to secure box while working)
To Next Page
Loading...
