Modena ED 770 - Dryer Safety Precautions; Safety Reset Procedure

English 22
Important Safety Instructions should always be noticed when using this dryer:
- Clothes with metal accessories are not allowed to be dried with dryer. Dryer will be damaged if
the metal accessories are detached off when drying. Please use the drying rack to dry clothes
with metal accessories.
- Read all instructions meticulously before operating.
- Make sure the voltage printed on the dryer is suitable to the voltage at your home before
connecting this dryer to the electricity source.
- To avoid the possibility of fire:
a. Do not dry clothes which have been washed/soaked/sprinkled by gas, liquid solvent for dry
cleaning or other flammable liquids because those liquids produce gas that trigger explosion.
b. Clothes which are made up of latex or its kind are not allowed to be dried at hot temperature.
These materials, when heated at certain conditions, may produce fire spontaneously.
- Do not operate this dryer if the electricity wire or plugs are damaged, and do not function
accordingly.
- Do not alter or modify the specifications of the product in any form they may cause hazards.
- Make sure the power cable is not crushed by the unit.
- All forms of electrical work associated with the installation of this unit at the time, should be done
by experts who is professional.
- Important!! The unit is not and is not to be installed in a built-in.
- If the unit is moved, transportation must be done vertically.
Do not remove or inset the
socket with wet hands.
The machine must be
connected to a power supply
with an efficient earth
connection, according to the
law.
Do not use an extension
lead.
Do not expose the machine
directly under the sun.
Do not pull the power feed
cable or the equipment to
remove the plug from the
power socket.
After use, it is advisable to
disconnect the machine
from the power supply.
Safety Reset
1. These dryers have a safety cut out switch which is activated by temperature
2. The safety reset button is on the backboard. If your dryer not heating this button must be
reset before the dryer will operate again. You may need to wait 10 minutes for cooling to
occur.
Part 6: Precautions