28
(2) “” Button
This button is used cooperatively with the “BOOK” button to
adjust the booked time. The specific operations are shown in
the booking adjustment function.
Temperature setting: temperature is adjusted in the range of
75-74-73-…-(Tmin+1)-(Tmin)-75. The setting temperature will
reduce by 1
o
C after “” button is clicked for once. Long
pressing “” button will render the setting temperature to
decrease at the rate of 5
o
C/s. If no button is pressed within 5s,
the system will store the setting temperature parameters and
exit the temperature setting status.
(3) “” Button
This button is used cooperatively with the “BOOK” button to
adjust the booked time. The specific operations are shown in
the booking adjustment function.
Temperature setting: temperature is adjusted in the range of
(Tmin)-(Tmin+1)-(Tmin+1)…75-(Tmin). The setting temperature
will increase by 1
o
C after the “” button is clicked for once.
Long pressing “” button will render the setting temperature to
increase at the rate of 5
o
C/s. If no button is pressed within 5s,
the system will store the setting temperature parameters and
exit the temperature setting status.
NOTE
The “ ” button is the highest priority button among all
buttons in the system. If you press it under all failure-free
working conditions, the system will enter into the power-off
state; no content is displayed in the power-off state.
The software version number will be displayed after the
full-screen mode on the display for 2s (the double “8” digits
shown on the digital screen will turns into 01).
To Next Page
Loading...
