Modern Forms Mykonos - Installing the LED Luminaire Module and Glass

FR-W1819
Mykonos Instructions22
8. Installing the LED Luminaire Module and Glass
WARNING: Before starting installation, disconnect the power
by turning off the circuit breaker or removing the fuse at fuse box.
1. Remove 3 screws from the outer perimeter of the adapter plate
and keep for future use.
2. Raise and hold the LED luminaire module close to the adapter
plate and proceed to secure the wire connections. Connect the
white wire connectors from the luminaire module to the white
wire of the fan. Connect the blue wire from the fan to the black
wire from the LED module.
3. Tuck connections neatly into mounting plate. Place the luminaire
module against the adapter plate and secure with the 3 screws
previously removed.
4. Raise glass shade up against the luminaire module, and
secure it to fan by turning shade clockwise until snug.
Do not overtighten.