FH-W2004
TipTop Instructions12
2. Installing the Mounting Bracket
Remember to disconnect the power at the circuit breaker.
1. 1. Attach the mounting bracket to the outlet box with the screws
provided with your outlet box.
2. Pass supply wires through mounting bracket and
secure to outlet box. and very supply wire colors and designations.
1. Insert blades in slots, aligning with motor assembly holes.
2. Secure blades with blade attachment screws. Use Part B.
3. Attaching the Fan Blade
1. Remove three screws from the top of the motor housing and place
the decorative trim ring on the body of fan housing as shown.
2. Reattach the motor housing by re-installing the three screws.
4. Adding the Decorative Trim Ring
To Next Page
Loading...
