3
Pairing Your Headset to Your Phone
• Before you start, ensure that:
• Your headset is charged (see“Charging your headset”), and the charging cable
has been disconnected.
• The headset is set up: press the power button on the side of the headset for
more than 10 seconds until you hear a series of beeps.
• Bluetooth
™
wireless technology is enabled on your phone.
• You have installed the Modius
™
app from the Apple
®
App Store or Google Play
®
and completed the registration process.
• With the headset powered off:
• Press the power button on the side of the headset for 4 seconds
• You’ll hear a long-pitched beep, the power button will blink white and the LED
indicator will blink blue to indicate it is turned on and ready to pair.
• Start the Modius
™
device app on your phone, the app will give you an indication that
it is looking for your headset.
• Once the headset connects to the app you will hear two short beeps and the LED
indicator will flash blue. This is the headset letting you know that your phone has
requested to pair with it.
• Click the power button on the headset once to accept the pairing.
• On your smartphone, you will be presented with a notification telling you that the
headset wishes to pair with your phone. Accept the pairing.
• It may take around 10 seconds for pairing to complete.
• When the pairing is complete, the interface of the app should change to let you start
controlling your headset.
2. Getting Started…
Charging Your Modius
™
Headset
• Connect the power cable supplied to a USB socket and to the headset.
• If the headset is charging successfully the LED indicator will be solid amber.
• When the headset is charged, the LED indicator will turn off.
• If you connect the power cable to the headset and the LED indicator blinks amber,
the device is experiencing a charging error (see “Troubleshooting”).
NOTE: Please ensure you disconnect the charging cable before attempting to use your headset.
To Next Page
Loading...