MODSTER Arrows Marlin 64mm

Questions and Answers

S
Steven FischerAug 7, 2025
What to do if the MODSTER Arrows Marlin 64mm Toy motor loses power?
- S
  Sean MillerAug 7, 2025
  If your MODSTER Toy aircraft's motor loses power or pulses, and then loses power, it could be due to damage to the motor or battery, a loss of power to the aircraft, or the ESC using the default soft Low Voltage Cutoff (LVC). Inspect the batteries, transmitter, receiver, ESC, motor, and wiring for any damage, replacing parts as needed. Land the aircraft immediately and recharge the flight battery.
R
Ryan KingAug 11, 2025
How to fix MODSTER Arrows Marlin 64mm when the throttle is not responding?
- D
  deanna16Aug 12, 2025
  If your MODSTER Toy aircraft won't respond to the throttle but responds to other controls, the ESC may not be armed, or the throttle channel may be reversed. Try lowering the throttle stick and throttle trim to the lowest settings. If that doesn't work, reverse the throttle channel on the transmitter.
M
Mariah WheelerAug 15, 2025
Why is my MODSTER Arrows Marlin 64mm Toy flight time so short?
- D
  Destiny RodriguezAug 15, 2025
  If you are experiencing reduced flight time or your MODSTER Toy aircraft feels underpowered, it could be due to a low flight battery charge, the propeller being installed backward, or a damaged flight battery. Completely recharge the flight battery. If the issue persists, replace the flight battery, making sure to follow the battery instructions.
M
Michael CookAug 20, 2025
How to reduce vibration on MODSTER Toy?
- J
  Jenna HowardAug 20, 2025
  If you are experiencing excessive vibration or propeller noise with your MODSTER Toy, it might be due to a damaged spinner, propeller, motor, or motor mount, loose propeller and spinner parts, or the propeller being installed backward. Replace any damaged parts. Tighten all parts related to the propeller adapter, propeller, and spinner. If the propeller is backward, remove it and install it correctly.
C
Christopher GuerreroAug 25, 2025
Why are the controls reversed on my MODSTER Toy?
- S
  saunderscrystalAug 25, 2025
  If the controls on your MODSTER Toy are reversed, it means the channels are reversed in the transmitter. Perform the control direction test and adjust the controls for both the aircraft and the transmitter.
R
Rick ShermanAug 29, 2025
What to do if MODSTER Arrows Marlin 64mm Toy control surfaces are unresponsive?
- K
  Kristina PadillaAug 29, 2025
  If the control surfaces on your MODSTER Toy are unresponsive or sluggish, there may be damage to the control surface, control horn, linkage, or servo. Alternatively, a wire may be damaged, or connections may be loose. Replace or repair any damaged parts and adjust the controls. Check all connections for loose wiring.
S
Shannon JohnsonSep 2, 2025
Why is the LED flashing slowly on my MODSTER Arrows Marlin 64mm Toy receiver?
- W
  Walter WardSep 2, 2025
  If the LED on the receiver of your MODSTER Toy flashes slowly, it indicates a power loss to the receiver. Check the connection from the ESC to the receiver, inspect the servos for damage, and check the linkages for any binding.