Moduline Select Series - Closet Door Assembly Prep; Attach Closet Sides; Attach Closet Top Panel; Attach Closet Rear Horizontals

9 | PageRev C | 1/22/20
CLOSET



x6

x11
Step 1 Put the Door Assembly on foam to protect it from scratches.
Step 2 Attach both Sides to Door Assembly . (One side not shown for clarity)
Step 3 Attach Top to Sides .
Step 4 Attach Rear Horizontal to Sides .

 

 




x2
Foam (Packing material)
Warning: When using a driver to install self-tapping screws, start at a low clutch setting and increase
it incrementally until the screw turns. Reset your clutch each time you change batteries.