MoeBot S5 - Rectifying Problem Areas

To Next Page

To Previous Page

- 7 -

If a tree root is protruding

into the perimeter of your

cutting area it would

present a problem for the

mower.

One solution is to take the

perimeter around the tree

root, leaving this area

unmowed.

Alternatively, cut the tree

root back with a saw and

ﬁll any uneven surface

with soil, then set the

perimeter over it.

A deep enough dip in the

surface of your lawn will

also present problems,

possibly causing the

mower’s wheels to lose

their grip and skid.

If you don’t want to avoid

mowing this area, it’s best

to ﬁll it with soil, compact

it down and re-seed it with

grass.

If your mower encounters particularly long grass it may

treat it as an obstacle as it could bump the mower’s

obstacle sensor. The grass needs to be at a

reasonable level before MoeBot can function correctly.

If the area is on the

perimeter line this can

be pegged out as normal.

If it is within the mowing

area it should no longer be

a problem.

Rectifying or avoiding problem areas

Obstacles such as tree roots on lawn

Excessively uneven areas of lawn