Comfort programs
In automatic operation there
is a control with the switching
times of the comfort programs:
• Week (Mon–Sun)
• Weekdays (Mon-Fri)
• Weekend (Sat–Sun)
• Day (Mon, Tue, Wed, Thu, Fri, Sat,
Sun)
Every weekday can include four
switching times (P1 - P4). After reach-
ing the starting time, the comfort
temperature is adjusted. Outside the
switching times control is performed
according to the reduction tempera-
ture. The predefined switching times
can be adapted individually:
Mon–Fri: 5.00 am - 8.00 am
3.00 pm - 10.00 pm
Sat - Son: 6.00 am - 11.00 pm
¾ Confirm the selection by
pressing.
9 The display switches to the
comfort program overview;
the display indicates “day”.
¾ Select and activate a com-
fort program.
¾ Select a switching time P1
to P4.
¾ Set the start time and the
end time by rotating and
apply by pressing.
¾ Return to the comfort
program overview with
“BACK”.
¾ Set further switching times
or change to the Settings
menu with “BACK”.
• Automatic operation must be
activated.
• The comfort and reduction
temperatures must be set in
the Settings menu.
• The current time indications
must be set.
Temperature correction
Corrects a deviating measure-
ment of the actual tempera-
ture of the internal sensor by ±2°C in
0.1°C increments.
¾ Confirm the selection by
pressing.
¾ Set the correction value.
¾ Confirm the entry.
9 This is displayed in the
Settings menu.
Settings menu
To Next Page
Loading...
Need help?
General
