Moen Kingsley Posi-Temp T2112 Series User Manual

Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 7/08
THIN WALL APPLICATION
THICK WALL APPLICATION
7" (178mm)
ESCUTCHEON
DIAMETER
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
HOT
INLET
COLD
INLET
FINISHED WALL LINE
FACE OF STUD
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
7-1/2"
(191mm)
MIN.
6'-6"
(1981mm)
L
C
1 3/8" (35mm)
2 1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FLOOR LINE
1 3/8"
(35mm)
1 1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
L
C
KINGSLEY
™
POSI-TEMP
®
Single-Handle Shower (Trim Only)
Models: T2112 series
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes showerhead, arm and flange
OPERATION
• Handle operates counterclockwise through a 270˚ arc
with off at 6 o’clock and maximum hot at the 9 o’clock
position. Shut off in clockwise direction
• Adjustable temperature limit stop to control maximum
hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
FLOW
• Showerhead limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1,
ICC A117.1 and all applicable requirements referenced therein
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations

Moen Kingsley Posi-Temp T2112 Series Specifications

General

Collection	Kingsley
Model	T2112
Series	Posi-Temp
Technology	Pressure Balancing
Handle Style	Lever
Installation Type	Wall Mount
Connection Size	1/2 inch
Connection Type	IPS
Warranty	Limited Lifetime
ADA Compliant	Yes
Finish Options	Chrome, Oil Rubbed Bronze
Flow Rate (GPM)	2.5
Maximum Temperature	120°F
Valve Rough-In Size	1/2 inch
Compliance	ASME A112.18.1/CSA B125.1
Product Type	Shower Valve Trim
Valve Type	Posi-Temp Pressure Balancing

Summary

Critical Dimensions

Thick Wall Application

Details installation requirements for thicker walls, showing relevant dimensions.

Thin Wall Application

Details installation requirements for thinner walls, showing relevant dimensions.