Moen T2113 Series User Manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
T2113sp: Rev. 4/10
THIN WALL APPLICATIONTHICK WALL APPLICATION
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
7" (178mm)
ESCUTCHEON
DIAMETER
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
HOT
INLET
COLD
INLET
FINISHED WALL LINE
FACE OF STUD
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
7-1/2"
(191mm)
MIN.
TUB RIM
6'-6"
(1981mm)
L
C
1 3/8" (35mm)
2 1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FLOOR LINE
1 3/8"
(35mm)
1 1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
L
C
5-7/8"
(149mm)
8-3/4"
(222mm)
4-3/8"
(111mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes showerhead, arm, flange and diverter tub spout
OPERATION
• Handle operates counterclockwise through a 270° arc with off at 6 o’clock
and maximum hot at the 9 o’clock position. Shut off in clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 3°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
• EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi
• NH suffix models contain no showerhead
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein
• EP suffix models are IAPMO Green listed and third party certified to
WaterSense®
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
KINGSLEY
™
POSI-TEMP
®
Single-Handle Tub/Shower Trim Kit
Models: T2111 series - valve trim only
T2112 series - shower trim only
T2113 series - tub/shower trim
Valves: 62300 series
2500 series
Specifications
EP Suffix Models Only

Moen T2113 Series Specifications

General

Series	T2113
Finish	Chrome
Handle Type	Lever
Number of Handles	1
Valve Included	Yes
Valve Type	Posi-Temp
ADA Compliant	Yes
Showerhead Shape	Round
Warranty	Limited Lifetime
Installation Type	Wall Mount

Summary

Product Specifications

Product Overview: Kingsley Posi-Temp Trim Kit

Identifies the Kingsley™ Posi-TEMP Single-Handle Tub/Shower Trim Kit.

Product Description and Operation

Details on metal construction, included parts, and handle operation.

Flow Rate and Cartridge Information

Specifies flow rates for showerheads and cartridge design details.

Standards and Compliance

Lists certifications for ASME, CSA, WaterSense, and ADA compliance.

Warranty Details

Outlines lifetime limited warranty and commercial installation warranty.

Model and Valve Series

Lists available model series for valve trim, shower trim, and tub/shower trim.

Critical Dimensions and Applications

Diagrams showing dimensions for thick and thin wall installation applications.