Moen T4111 SERIES User Manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
3/16"(typ)
(5mm)
Plaster
Ground
Plastic
Tub/Shower
Surround
FINISHED WALL LINE
54"
(1372mm)
C
L
44"
(1142mm)
39"
(991mm)
Floor
7" Max
(178mm)
Escutcheon
2" Max Wall
(51mm)
THIN WALL APPLICATION
THICK WALL APPLICATION
KINGSLEY™ MOENTROL®
with Built-In 3 Function Transfer Valve Trim
Model: T4111 series
Discontinued Models: T4111CP, T4111P
DESCRIPTION
• Metal construction with various finishes identified by suffix
OPERATION
• Pull-on/push-off operation of temperature and volume,
rotational control of transfer valve
• Temperature operates through an 180˚ arc of handle
travel (full cold to full hot)
• Adjustable temperature limit stop to control maximum
hot water temperature
• 180˚ rotation of transfer valve handle with stops
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2˚
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1
• for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 12/08
ADA
There is more than 1 version of this model.
Page down to identify the version you have.

Moen T4111 SERIES Specifications

General

Material	Metal
Installation Type	Wall Mounted
Handle Style	Lever
Number of Handles	1
Valve Type	Moentrol Pressure-Balancing Volume Control
ADA Compliant	Yes
Connection Size	1/2 inch
Connection Type	IPS
WaterSense Certified	Yes
Lifetime Limited Warranty	Yes
Product Type	Faucet
Finish	Chrome

Summary

Kingsley Moentrol Trim Specifications

Product Description

Details the metal construction and various finishes available for the trim.

Product Operation

Explains the pull/push operation, temperature control, and pressure balancing.

Compliance Standards

Lists ASME and ADA certifications for the trim.

Warranty Information

Covers lifetime limited and 5-year commercial warranties.

Installation Diagrams

Shows critical dimensions for thick and thin wall installations.

Moenflo XL Single Function Showerhead Specifications

Showerhead Description

Details fixed mount, nonmetallic spray face, brass swivel ball, and available finishes.

Flow Rate

Specifies the designed flow rate of 2.5 gpm at 60 psi.

Product Standards

Confirms compliance with ASME A112.18.1/CSA B125.1 standards.

Showerhead Warranty

Outlines lifetime limited and 5-year commercial warranties.

Critical Dimensions

Diagram showing dimensions for showerhead arm and connections.

Small Single Function Body Spray Specifications

Body Spray Description

Details metallic spray face, brass swivel ball, and available finishes.

Body Spray Operation

States the single spray function of the body spray.

Body Spray Flow Rate

Specifies the maximum flow rate of 1.75 gpm at 80 psi.

Body Spray Standards

Confirms certification to ASME A112.18.1/CSA B125.1.

Body Spray Warranty

Provides a one-year warranty against material or manufacturing defects.

Body Spray Dimensions

Diagram showing critical dimensions for the A501 series body spray.