AM43 Blind Drive Motor
Manual Instruction
AM43-0.45/
40-ES-EB
Model Input Power
Solar panel
specs
Lock-rotor
current
Speed Range Torque Rated Current Battery Capacity
DC charger
8.4VDC
12V/0.3W 1.8A 20-40rpm 0.45Nm 1A
7.4VDC/
1000mAh
1.Features
2.Motor Specifications
4.Installation
3.Motor Illustration
Motor can set upper & bottom limit positions and limits can be saved even
when motor power off;
Tow running modes: tilting & continuous moving.Motor default mode is
tilting;
Motor can be control by APP on your smart phone;
Bluetooth bi-direction technology,you can see the status of your shades in
anytime;
Motor speed is adjustable on th APP;
Large battery capacity support long time working;
Powered by charger or solar panel,the solar panel with built in light sensor
for auto-control.
Do not exposure it under strong direct sunshine.Keep the
blind engine far away from high temperture or wet place
for using or storing.
UP
Indicator
Setting button
Solar & sensor connecting port
DOWN
1
2
3
4
5
6
7
1
Blind engine fixing plate installation options
1.3M adhesive 2.Screw fixing
Protection
teeth
Please leave 3-5mm space
between the bottom position
and support bracket during
installation.
4
Connect the solar panel or sensor to blind engine;Please pay attention the
wires in case wires wrapping.
Correct installation
4
Tighten the cords or chains to driving gear.
3
Choose compatible driving gear
Remove the cover plate of driving gear
Thin cord strings and
small bead chains
Thick cord strings Large bead chains
2
Enjoy Our Smart Life
Support:
service@moeshouse.com
To Next Page
Need help?
General