MOHAWK MODELS SYSTEM IA & SYSTEM IA-10
CONTENTS
TEXT
PAGE
APPENDAGES 2
SPECIFICATIONS 3
PACKING LIST 4
RECOMMENDED TOOL LIST 5
BEFORE INSTALLING A LIFT / WEJ-IT INSTALLATION 6
INSTALLATION INSTRUCTIONS 7-8
SAFETY TIPS 9
LIFT FINAL CHECKOUT 10
2-POST LIMITATIONS AND ADAPTER USAGE 11
PRE-OPERATION CHECKS AND LIFT PROCEDURES 12
MAINTENANCE PROCEDURES 13
CHAIN INSPECTION AND MAINTENANCE 14
CABLE INSPECTION AND MAINTENANCE 15-16
TROUBLE SHOOTING 17
ELECTRICAL RATINGS CHART………………………………………………………..19
SERVICE CHART 20
MAINTENANCE CHART 21
FIGURES / DIAGRAMS
FIGURE PAGE
FLOOR MODIFICATION 1 22
BAY SIGHT LAYOUT / INSTALLATION DIMENSIONS 2 23
CARRIAGE STOP ASSEMBLY 3 24
WEJ-IT INSTALLATION 4,5,6 25-27
POST-LEVELING 7 28
POST-SHIMMING 8,8A 29,30
BLEEDER VALVE ASSEMBY 9 31
CYLINDER SHIMS 10 32
CENTERING VEHICLE / BASE PLATE DETAIL 11 33
UNEVEN FLOORS 12 34
SPECIAL LIFTING PADS 13 35
POWER UNIT 14 36
CHAIN BREAK SAFETY CABLE 15 37
LIFTING PAD PROCEDURES 16 38
PARTS
FIGURE PAGE
ISOMETRIC FINAL ASSEMBLY MAN257A 40
MAIN SIDE ASSEMBLY MAN256 41
OFF SIDE ASSEMBLY 009-030-004 42
CARRIAGE ARM LOCK ASSEMBLY…………………………………………………..MAN222A………………………43
HYDRAULIC SYSTEM MAN201 44
CARRIAGE ASSEMBLY 009-030-005 45
LOCK BODY ASSEMBLY 009-030-006 46
YOKE ASSEMBLY MAN204 47
HEIGHT ADAPTER & BRACKET / CYLINDER CLAMPS MAN205 48
CARRIAGE / SWING ARMS / SLIDERS / LIFTING PADS MAN253 49
LEG WELDMENT / LINE SUPPORTS / CARRIAGE STOPS MAN207 50
TAG & DECAL LOCATIONS MAN228 51
MAIN SIDE CYLINDER ASSEMBLY MAN209 52
OFF SIDE CYLINDER ASSEMBLY MAN210 53
BLEEDER VALVE ASSEMBLY MAN213 54
SMALL PARTS BAG MAN231 55
PARTS BOX MAN232 56
CHAIN COVER ASSEMBLY 009-010-062 57
DIVERTER VALVE ASSEMBLY MAN235 58
NEW SLAB RECOMMENDATIONS
PAGE
SLAB REQUIREMENTS & NEW SLAB RECOMMENDATIONS 58-66
ALI WARNING, CAUTION AND SAFETY MESSAGES 67-69
ALL INFORMATION, ILLUSTRATIONS, AND SPECIFICATIONS IN THIS MANUAL ARE BASED ON THE LATEST PRODUCT INFORMATION
AVAILABLE AT THE TIME OF PRINTING. WE RESERVE THE RIGHT TO MAKE CHANGES AT ANY TIME WITHOUT NOTICE.
To Next Page
Loading...
