MOISWELL Defender X145 - Plug in; Understand the Control Panel

4
(Ensure there are no kinks or other obstructions that will stop the water to flow.)
3. Plug in
·Uncoil the power cord and plug it firmly into a properly grounded 110-120 volt AC
outlet.
·After plugged in, the control panel will light up for 1-2 seconds and then goes off,
which is the normal self-diagnose process and does not require any user intervention.
4. Understand the Control Panel
The control panel on the dehumidifier has an LCD screen and 4 buttons. Press the
ON/OFF Button to turn the dehumidifier on. The LCD screen will light up and display
the readouts as below.
IMPORTANT
Please let the dehumidifier sit outside the box for 24 hours before initial plugging in.