EasyManua.ls Logo

MoJack XT User Manual

Default Icon
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Ver. 082611
Question and Answer IconNeed help?

Do you have a question about the MoJack XT and is the answer not in the manual?

MoJack XT Specifications

General IconGeneral
BrandMoJack
ModelXT
CategoryLifting Systems
LanguageEnglish

Summary

Introduction

Warnings and Safety Instructions

Warranty and Returns

Limited Warranty

Details the warranty terms for residential and commercial use against defects in material or workmanship.

Warranty Coverage

Explains what the warranty covers and what it excludes, including misuse, abuse, accident, or negligence.

Getting Warranty Service

Outlines the process for obtaining warranty service, including registration, proof of purchase, and contact.

Return Policy

Details the procedure for returning the product within 30 days, including RMA, packaging, and potential fees.

Parts List

Hardware List

Assembly Instructions

Step 1: Unpack and Inventory

Instructions for removing the MoJack XT from packaging and checking for all parts and hardware.

Step 2: Assemble Wheels to Base

Guide for attaching the wheels to the base using cap screws and Nylock nuts.

Step 3: Attach Tower to Base

Instructions for connecting the tower assembly to the base using cap screws and Nylock nuts.

Step 4: Attach Grip Handle

Instructions for attaching the grip handle to the tower using carriage bolts and Nylock nuts.

Step 5: Attach Crank Handle

Guide for attaching the crank handle to the tower, noting adjustment options for cranking radius.

Step 6: Hang Lift Arm on Carrier

Instructions for attaching the lift arm to the carrier and securing it with a clevis pin and hair pin.

Step 7: Install Lift Arm Inserts

How to slide lift arm inserts into the lift arm and secure them with push pins.

Step 8: Prepare Wheel Pads

Instructions for adding support rods and large hair pins to the wheel pads.

Step 9: Install Wheel Pads

Guide for attaching the wheel pads to the lift arm inserts and securing them with push pins.

Operating Instructions

Step 1: Unfolding MoJack XT

How to unfold the MoJack XT by unlocking and raising the tower into the base.

Step 2: Installing Lift Arm

Instructions for hanging the lift arm on the carrier and securing it with a clevis pin.

Step 3: Installing Lift Arm Inserts

How to slide lift arm inserts into the lift arm and secure them with push pins.

Step 4: Installing Wheel Pads

How to slide wheel pads onto lift arm inserts and temporarily secure them with push pins.

Step 5: Familiarize Yourself with MoJack XT

Practice raising/lowering the lift arm and using drill attachments before lifting a mower.

Step 6: Aligning Wheel Pads to Fit Mower

How to position wheel pads to center mower tires and secure them with push pins.

Step 7: Adjusting Support Rods for Proper Tire Size

Guide for adjusting support rods on wheel pads based on mower tire diameter.

Step 8: Reverse Front Tires of Mower

Optional step to reverse mower tires if deck or wheels interfere with the lift arm.

Step 9: Move Mower onto MoJack XT

Instructions for driving or rolling the mower onto the wheel pads and stopping the engine.

Step 10: Strapping Front Mower Tires to Wheel Pads

How to secure the mower tires to the wheel pads using safety straps.

Step 11: Adjusting the Crank Handle

Optional adjustment of the crank handle for different mower clearances or user preference.

Step 12: Raising the Mower

How to raise the mower by rotating the crank handle clockwise.

Step 13: Raising Lift Arm to Locking Position

How the carrier locking pin engages to secure the lift arm at the desired height.

Step 14: Preparing the Mower for Service

Instructions for securing the mower with wheel chocks and engaging the parking brake.

Step 15: Lowering the Mower

How to lower the mower by counter-clockwise rotation and releasing the carrier locking pin.

Step 16: Removing the Mower from MoJack XT

Instructions for removing the mower from the lift after it has been lowered.

Preparing the MoJack XT for Storage

Step 17: Removing the Wheel Pads

How to remove wheel pads from the lift arm inserts and store the push pins.

Step 18: Removing Lift Arm Inserts

How to remove lift arm inserts from the lift arm and store the push pins.

Step 19: Unhooking the Lift Arm

How to unhook the lift arm from the carrier and store the clevis pin and small hair pin.

Step 20: Raise Carrier

How to raise the carrier to store the unit by locking the carrier locking pin.

Maintenance Schedule

Step 21: Folding the MoJack XT

Instructions for folding the MoJack XT by unlocking and securing the tower for storage or transport.

Step 22: Raising MoJack XT with Power Drill

Optional method for raising/lowering the lift arm using a variable speed power drill.

Related product manuals