4
Check for completeness
rear side with power management
5
Safety Instructions
To avoid crushing or shearing hazards, the desk with its moving parts must
keep a minimum distance of 50 cm to adjacent objects such as furniture,
building parts etc.
When adjusting the table top height, the user must make sure that nobody
can be injured and no objects can get damaged. The desk must not
collide with fixed objects , because it otherwise may tip over!
Before adjusting the table top height, please move away chairs, containers
etc. to avoid possible collisions.
Solid objects are usually detected by the optional collision protection, but
the danger of crushing for persons still exists! The collision protection
protects the system, NOT persons!
2
1
5
2x
moll T7 / T7 XL
06. 2018
5
0 c
m
5
0
c
m
To Next Page
Loading...
