ENG
3. HOW TO USE THE E-BIKE
3.3 DRIVING INSTRUCTIONS
Always inspect the vehicle before use. Check the brakes, that everything is in place, check air pressure and use safety
equipment.
3.3.1 BEFORE USING THE E-BIKE
• Before putting the product into use, the buyer must familiarize himself with the user manual
• Choose a suitable place for your rst rides and get to know the electric bike
• Set up the e-bike according to the instructions shown in the user manual
• We recommend a helmet and other protective equipment
• You should familiarize yourself with brakes, braking distance and how the product behaves when braking before using the
product in trafc/among people. Test at low speeds rst and work your way up to high speed emergency braking
• Press and hold the on/off button to turn on the e-bike
• Remember to shift between gears while driving and to use the bell and lights on roads, carriageways and among other road
users
• Be aware that sudden, unforeseen obstacles may appear along the way. Use common sense with regard to speed and adapt
your driving to the conditions and surface
• The auxiliary motor works like this: When the pedals are activated, a sensor sends signals to an electronic control, which then
starts the motor. The power of the auxiliary motor is adjusted in relation to the selected assistance level. You can adjust the
level of assistance as needed while riding. You can put in maximum assistance when riding uphill, while you can turn off the
assist motor when riding downhill. The electronic control unit automatically disconnects from the motor when you stop using
the pedals. Likewise, the control unit disconnects the engine when your speed exceeds 25 km/h
• Show consideration for all trafc rules that are relevant in relation to bicycles/electric bicycles
• These models are developed for cycling on public roads and pavements. Avoid off-road driving and rough terrain
• It is completely normal for the engine to make a little noise while driving
3.3.2 DRIVING
To Next Page
Loading...
