38
BATTERY CHARGING
Charge the battery for 4-5 hours before first use of the kickscooter.
Always check the battery level positioned on the display.
There are four LED lights. In case there is only one LED light, we suggest stop using the scooter and charge battery.
Do not charge the battery if the temperature is lower than 0°C.
Before using the kickscooter for the first time, fully charge the battery.
Charging should be in a safe, dry and clean environment.
The kickscooter must be powered-off before proceeding with charging.
Do not use the kickscooter when charging the battery.
1. Open the protective cover on the kickscooter.
Ensure the charging port is dry and insert the battery-charger into the kickscooter charging port. The other end of the charger
must be connected to the mains to activate the charger.
It is important to connect first the cable to the battery and then to the mains.
The indicator light on the charger will be red: this grants that the charge is proceeding.
To Next Page
Loading...
