To Next PageTo Next Page
Need help?Do you have a question about the Monacor PA-12040 and is the answer not in the manual?
Details the controls and indicators on the amplifier's front panel.
Outlines the connections and controls located on the amplifier's rear panel.
Instructions on how to install the amplifier into a standard 19-inch equipment rack.
Guidance on connecting speakers to zones, including PA and low-impedance types, respecting impedance and load limits.
Instructions for connecting microphones, line-level audio sources, monitoring speakers, and headphones.
Details on emergency announcement input, input muting, line signal outputs, and power supply connection.
Procedures for using mute buttons and priority switches to silence specific audio inputs.
Methods for monitoring audio signals from different PA zones via headphone or monitor outputs.
Details the controls and indicators on the amplifier's front panel.
Outlines the connections and controls located on the amplifier's rear panel.
Instructions on how to install the amplifier into a standard 19-inch equipment rack.
Guidance on connecting speakers to zones, including PA and low-impedance types, respecting impedance and load limits.
Instructions for connecting microphones, line-level audio sources, monitoring speakers, and headphones.
Details on emergency announcement input, input muting, line signal outputs, and power supply connection.
Procedures for using mute buttons and priority switches to silence specific audio inputs.
Methods for monitoring audio signals from different PA zones via headphone or monitor outputs.
General| Impedance | 4 Ω |
|---|---|
| Power supply | 230 V AC, 50 Hz |
| Frequency Response | 20Hz - 20kHz |
| Outputs | Speaker terminals |
| Frequency range | 20Hz - 20kHz |
