To Next PageTo Next Page
Need help?Do you have a question about the Monacor PA-1120 and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Frequency range | 55 - 16000 Hz |
| Audio output channels | 5.0 channels |
| Peak power per channel | 170 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | 1 % |
| Headphone outputs | 1 |
| Line inputs (RCA) | 2 |
| Headphone connectivity | 6.3 mm |
| Speakers connectivity type | Clamp terminals |
| Product color | Black |
| Treble adjustment | Yes |
| Connectivity technology | Wired |
| Operating temperature (T-T) | 0 - 40 °C |
| Maximum current | 15 A |
| AC input voltage | 230 V |
| DC input voltage | 24 V |
| AC input frequency | 50 Hz |
| Built-in display | No |
Weight and Dimensions| Depth | 352 mm |
|---|---|
| Width | 482 mm |
| Height | 133 mm |
| Weight | 13000 g |
Details the front panel controls and indicators of the amplifier, including buttons, knobs, and LEDs.
Details the rear panel connections and terminals for speakers, power, and external devices.
Provides instructions for connecting speakers, microphones, and other audio units to the amplifier.
Details how to connect 100V and 4-ohm speakers to the amplifier's output terminals.
Explains how to connect microphones using XLR or 6.3mm jacks, including gain and phantom power settings.
Guides on setting the main volume levels for different priority announcements.
Explains how to select and activate specific PA zones for broadcasting.
