Need help?Do you have a question about the Monacor PA-980 and is the answer not in the manual?
Controls for preamplification, tone, volume, indicators, and power switch.
Mains, fuse, ground, speaker, emergency power terminals, and protective cover.
Mounting brackets, rack space requirements, and secure placement within a rack.
Connecting speakers, protective cover usage, impedance matching, and transformer voltage cautions.
Connecting microphones and line-level devices to INPUT 1-4 and AUX, MIC/LINE switching, and phantom power.
Inserting external processors via PRE OUT/AMP IN and connecting additional amplifiers via LINE OUT.
Using channel 1 for announcements to automatically reduce other channel volumes.
Controls for preamplification, tone, volume, indicators, and power switch.
Mains, fuse, ground, speaker, emergency power terminals, and protective cover.
Mounting brackets, rack space requirements, and secure placement within a rack.
Connecting speakers, protective cover usage, impedance matching, and transformer voltage cautions.
Connecting microphones and line-level devices to INPUT 1-4 and AUX, MIC/LINE switching, and phantom power.
Inserting external processors via PRE OUT/AMP IN and connecting additional amplifiers via LINE OUT.
Using channel 1 for announcements to automatically reduce other channel volumes.
General| Frequency Range | 20 Hz - 20 kHz |
|---|---|
| THD | < 0.5% |
| Power Supply | 230 V AC, 50 Hz |
| Dimensions | 430 x 88 x 300mm (W x H x D) |
| Weight | 6.7 kg |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | < 0.5% |
| Inputs | 2 x RCA |
| Damping Factor | ≥ 100 |
| Output Power | 2 x 80W (4Ω), 2 x 50W (8Ω) |
| Power Output | 2 x 80W (4Ω), 2 x 50W (8Ω) |
To Next Page
