Monacor PA-906 - User Manual

BEDIENU NGSANLEI TUNG
INSTRUC TION MANUA L
MODE D’EM PLOI
ISTRUZIO NI PER L’USO
MANUA L DE INSTRUCCIONES
INSTRUK CJA OBSŁUGI
VEILIGHE I DSVOORSCHRIFTEN
SIKKERHEDSOPLYSNINGER
SÄKERHETSFÖRESKRIFTER
TURVALLI SUUDESTA
ELA-MISCHVERSTÄRKER
PA MIXING AMPLIFIER
PA -906
Bestellnummer 17.3170

Monacor PA-906 Specifications

General

Brand	Monacor
Model	PA-906
Category	Amplifier
Language	English

Summary

Operating Elements and Connections

1.1 Front panel

Describes the controls, indicators, and switches located on the front of the amplifier unit.

1.2 Rear panel

Details the various input/output connections, DIP switches, and terminals on the rear of the amplifier.

Safety Notes

Connections

5.1 Speakers

Guidance on connecting 100V/70V speakers and low-impedance speakers to the amplifier outputs.

5.2 Microphones

Steps for connecting microphones, including options for XLR, 6.3mm jacks, and phantom power.

5.3 Audio units with line output

How to connect line-level audio sources like mixers or CD players to the input channels.

5.4 Audio units for signal processing

Instructions for integrating external audio signal processors via SEND/RETURN jacks.

5.5 Recorder or additional amplifier system

Details on connecting recorders or slave amplifiers using the SLAVE OUT RCA jack.

5.6 Momentary pushbutton switch for activating the chime

Connects a switch to activate the chime function before announcements.

5.7 Power supply and emergency power supply

Information on connecting the unit to mains power and a 24V emergency power source.

Operation

6.1 Automatic priority circuit (talkover)

Explains the talkover feature that attenuates other channels during announcements.

6.2 Chime

Instructions on how to activate the chime signal, typically before announcements.

Specifications