Do you have a question about the Monacor STA-450D and is the answer not in the manual?
Sets the channel operating mode (NORMAL or BRIDGE) using the switches.
Procedure for safely switching the amplifier on and off to avoid loud switching noises.
Guides on adjusting volume levels, input signals, and muting individual channels.
Sets the channel operating mode (NORMAL or BRIDGE) using the switches.
Procedure for safely switching the amplifier on and off to avoid loud switching noises.
Guides on adjusting volume levels, input signals, and muting individual channels.
| Power Supply | 230 V AC, 50 Hz |
|---|---|
| Inputs | 2 x XLR, 2 x 6.3 mm jack |
| Frequency Response | 20 Hz - 20 kHz |
| Outputs | Speaker screw terminals |
| Output Power | 450W @ 4 Ohms |
| Total Harmonic Distortion (THD) | <0.05% (1kHz, 1W) |












Loading...