Need help?Do you have a question about the Monacor SAM-300D and is the answer not in the manual?
Connect audio sources via line level or speaker outputs for subwoofer integration.
Route the input signal to another amplifier or active speaker system via LINE OUT.
Connect the mains cable to the unit and a standard mains socket.
Connect audio sources via line level or speaker outputs for subwoofer integration.
Route the input signal to another amplifier or active speaker system via LINE OUT.
Connect the mains cable to the unit and a standard mains socket.
General| Input Sensitivity | 0.775 V |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 4Ω |
| Outputs | Binding posts |
| Power Supply | 230 V AC |
To Next Page