Need help?Do you have a question about the Monacor SAM-500D and is the answer not in the manual?
Details the status LED, level, cut-off, phase controls, and various input/output jacks.
Covers mains voltage hazards, indoor use, handling, cleaning, and warranty disclaimer.
Explains connecting line-level or high-level inputs for audio signals.
Describes the line-level output for routing signals to other audio equipment.
Details how to connect the mains cable to the power socket.
Details the status LED, level, cut-off, phase controls, and various input/output jacks.
Covers mains voltage hazards, indoor use, handling, cleaning, and warranty disclaimer.
Explains connecting line-level or high-level inputs for audio signals.
Describes the line-level output for routing signals to other audio equipment.
Details how to connect the mains cable to the power socket.
General| Type | Class D Amplifier |
|---|---|
| Power Output | 500 W |
| Input Sensitivity | 0.775 V |
| Outputs | Speakon, Binding Posts |
| THD | < 0.1% |
| Power Supply | 230 V AC, 50 Hz |
| Frequency Response | 20 Hz - 20 kHz |
| Inputs | XLR, RCA |
| Impedance | 4-8 ohms |
To Next Page