EasyManua.ls Logo

Monarch Ezi-Fold D10 - Battery & Fastener Guidelines; Install Setup

Monarch Ezi-Fold D10
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Batteries
(1) Batteries are special lithium batteries designed specifically for use in the Ezi-Fold Power Wheelchair.
(2) Read all battery instructions before attempting to change or charge batteries.
(3) When you don’t use the Ezi-Fold wheelchair for long periods of time, please charge the battery every
month to avoid the battery being damaged.
Fasteners
Many of the screws, bolts and nuts on the Ezi-Fold are special high-strength fasteners. Replacing these
fasteners with non-approved parts may cause your Ezi-Fold Power Wheelchair to result in faulty
operation and may cause harm to you or other people, therefore:
A. Use fasteners that have been supplied by MM.
B. Using the correct tools, tighten any fasteners that become loose as soon as possible.
Change and Adjustments
Never use non- Ezi-Fold Power Wheelchair parts or make changes unless authorized in writing by
representative from our company. Doing so will void the warranty and may create a safety hazard.
Install Setup
Your Ezi-Fold Power Wheelchair will arrive carefully packaged in a cardboard box.
1. Open the top of the box then turn the box on the side for easier pulling out the chair and contents.
2. Total components as bellow: