Safe Operation
This is the most important section of manual; how to safely operate the Ezi-Fold Wheelchair. Please review
this section thoroughly.
◎ General safety:
a. Adjust the Ezi-Fold Wheelchair to your personal comfort level as much as possible.
b. Take your time to learn how the Ezi-Fold Wheelchair works in a private space before you begin operating
around others.
c. Practice bending, reaching and transferring in and out of Ezi-Fold Power Wheelchair.
d. Always be aware of your surroundings.
e. If you are not sure the Ezi-Fold can surpass an obstacle, try to find another way around.
f. Make sure that electronic components such as the control panel, battery charge, and other electronic
controlled components avoid moisture. If these components encounter moisture, dry before use.
g. The Ezi-Fold Wheelchair seat is designed for comfort, not specifically for pressure relief; if you suffer
from pressure sores, or if you are at risk that they will occur, please consult your doctor.
◎ Before using your Ezi-Fold Power Wheelchair
(1) Make sure the Ezi-Fold Wheelchair is operating smoothly.
(2) Check for any unusual noises, vibration, or a change in the ease of use; if you detect a problem, get in
touch with our service department.
(3) Failing to maintain your Ezi-Fold Wheelchair could increase the risk of injury.
◎ Getting into the Ezi-Fold Power Wheelchair
(1) Before sitting, make sure the Ezi-Fold is switched off, this will ensure the Ezi-Fold will not move upon
touching the joystick.
(2) Make sure the footrest is down.
(3) Once on board, make sure your feet are safely on the footrest.
To Next Page
Loading...