Monarch Ezi-Fold D10 - Troubleshooting

To Next Page

To Previous Page

4. Fold the wheelchair.

5. When folded, the seat cross bar can be used to move the wheelchair easily.

Trouble shootings

The following represents the most common questions asked about the Ezi-Fold about everyday use;

check this helpful guide or the operator’s manual for more information if you have a question about using

your power wheelchair.

Question

Possible causes

Answer

Why is there No Power to the

wheelchair?

1. Controller system power is not

connected.

2. Controller system CPU and

joystick are not connected.

1. Connect the battery.

2. Ensure all connections

between joystick, CPU and

battery are securely tightened.

Seat cross bar