Potensi Elevator
1
/
13
MDKE3 USER MANUAL
1. Introduction
The MDKE3 LCD operator has two modes of display in Chinese and English, and has many
functions such as parameter modification, parameter copy, curve display, port monitoring, error
help, and call display. Engineers can easily monitor various states of the integrated controller
through these functions. , which brings great convenience to debugging.
MDKE3 Applicable objects: NICE3000new, NICE5000, NICE7000.
2. MDKE3 Operator Block Diagram
Function key 1 (performs the function shown in the lower left corner of the screen)
Function key 2 (performs the function shown in the lower right corner of the screen)
Button description:
1. Function key 1: Execute the function displayed in the lower left corner of the screen,
such as "Return".
2. Function key 2: Execute the function displayed in the lower right corner of the screen,
that is, the "confirmation key", which can enter the menu screen step by step.
3. Knob + button: The knob can be rotated left and right. For example, in the main menu,
it means to move the current cursor left and right. When the function code is displayed, it
means to move the current cursor up and down. When modifying parameters, the parameter
where the current cursor is located can be decreased or increased; press the button It means
"OK", and also means "shift" when modifying parameters.
4. Stop key and run key: When the host is in the operation control mode of the
operation panel, the running state of the host can be changed through these two keys.
5. PRG key: Quickly return to the previous menu.
To Next Page
Need help?
General
