Need help?Do you have a question about the Monarch NICE7000 and is the answer not in the manual?
General| Controller Type | NICE7000 |
|---|---|
| Cooling Method | Forced air cooling |
| Enclosure Rating | IP20 |
| Input Voltage | 3-phase 380V~480V AC |
| Input Frequency | 50/60Hz |
| Output Voltage | 3-phase 0~Input Voltage |
| Output Frequency | 0~400Hz |
| Overload Capacity | 150% for 60s, 180% for 10s |
| Control Method | V/F Control |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Short Circuit, Ground Fault |
| Communication Interfaces | RS485 |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 1000m (derating required above) |
Provides critical safety guidelines for installation, handling, and operation to prevent injury or damage.
Covers requirements for installation environment, clearance, and mounting of the controller.
Details the terminal arrangement, main circuit wiring, and control circuit terminal descriptions.
Presents the overall electrical wiring diagram for the NICE7000 control system.
Describes the functions of the 3-button keypad for navigating menus and entering commands.
Outlines the step-by-step procedure for system commissioning to ensure safe and normal elevator operation.
Provides a comprehensive reference table for all function codes, their parameters, and settings.
Covers routine and periodic maintenance procedures to ensure controller longevity and performance.
Lists common fault codes, their possible causes, and recommended solutions for diagnosing and resolving issues.
To Next Page
