Monarch NICE7000 - Installation of Final Limit Switches

3 Mechanical and Electrical Installation NICE7000 User Manual
- 68 -
3.10.4 Installation of Final Limit Switches
•
The nal limit switch is to protect the elevator from over travel top/bottom terminal when
the elevator does not stop completely upon passing the up/down limit switch.
•
The up nal limit switch is mounted above the up limit switch. It is usually 150 mm away
from the top leveling position.
•
The down nal limit switch is mounted below the down limit switch. It is usually 150 mm
away from the bottom leveling position.