Monarch NICE7000 - Function Code Description; Function Code Groups; Chapter 6 Function Code Table

6 Function Code Table NICE7000 User Manual
- 102 -
Chapter 6 Function Code Table
6.1 Function Code Description
1. There are a total of 31 function code groups, each of which includes several function
codes. The function codes adopt the three-level menu. The function code group number
is Level-I menu; the function code number is Level-II menu; the function code setting is
Level-III menu.
2. To improve operation security, users need to enter the passwords for operating group
F1, FA, and FH parameters. Their initial passwords are 01000.
3. The meaning of each column in the function code table is as follows:
Function Code Indicates the function code number.
Parameter Name Indicates the parameter name of the function code.
Setting Range Indicates the setting range of the parameter.
Default Indicates the default setting of the parameter at factory.
Unit Indicates the measurement unit of the parameter.
Property
Indicates whether the parameter can be modied (including the modication
conditions)
The modication property of the parameters includes three types, described as follows:
"
☆
": The parameter can be modied when the controller is in either stop or running state.
"
★
": The parameter cannot be modied when the controller is in the running state.
"●": The parameter is the actually measured value and cannot be modied.
The system automatically restricts the modification property of all parameters to prevent
mal-function.
6.2 Function Code Groups
On the operation panel, press
PRG
and then or , and you can view the function
code groups. The function code groups are classied as follows:
Function
Code Group
Type
Function
Code Group
Type
Function
Code Group
Type
F0
Basic
parameters
F8
Auxiliary logic
parameters
FL
Extension
terminal function
parameters