Monarch NICE7000 - Input and Output Terminals of HCB-H

3 Mechanical and Electrical Installation NICE7000 User Manual
- 44 -
Table 3-6 Input and output terminals of HCB-H
Terminal
Name
Function Terminal Wiring
JP1
Interface for the elevator lock switch and up
arrival indicator
Pins 2 and 3 are for switch input. Pins 1 and 4
are output of the up arrival indicator (24 VDC
output, load capacity: 40 mA).
1 2 3 4
Elevator
lock switch
input
Up arrival
indicator
JP2
Interface for the re emergency switch and down
arrival indicator
Pins 2 and 3 are for switch input. Pins 1 and 4
are output of the down arrival indicator (24 VDC
output, load capacity: 40 mA).
1 2 3 4
Fire
emergency
switch input
Down arrival
indicator
JP3
Interface for the up call button and indicator
Pins 2 and 3 are for up call input. Pins 1 and 4
are power supply for the up call indicator (24
VDC output, load capacity: 40 mA).
1 2 3 4
Up call indicator
Up call
button
JP4
Interface for the down call button and indicator
Pins 2 and 3 are for down call input. Pins 1 and 4
are power supply for the down call indicator (24
VDC output, load capacity: 40 mA).
1 2 3 4
Down call indicator
Down call
button
S1
Button for setting the oor address.
Hold down the button to adjust the oor address
(range 0–56). After you stop pressing, the
address number blinks three times and the
setting is successful.
S1
CN1
Modbus communication and power supply
terminal
Pins 2 and 3 are for Modbus communication.
Pins 1 and 4 are for DC power supply.
1 2 3 4
MOD-
MOD+
24V
COM