Mongoose 6061 - Hub Bearings and Tire Inflation

Maintenance 6
59
Drivetrain (pedals, chains, chainwheel, crank set, freewheel)
Inspect Acon Maintenance
Pedals Every month, check each pedal is securely set and ghten into
the crank arm.
If necessary, re-set and ghten.
Before each ride, check each front and rear pedal reectors are
clean and in place.
Clean or replace.
Pedal Bearings Every ride, check the pedal bearings are properly adjusted.
Move the pedal up and down, le and right. If looseness or
roughness is detected adjustment, lubricaon or replacement
is required.
See bicycle mechanic for repair.
Chains Every week, check the chain is clean, properly lubricated,
rust-free, and is not stretched, broken, or has s links.
Lubricate if necessary. Replace if rusted,
stretched, or broken.
Crank Set Every month, check the crank set (crank arms, chain rings, and
boom bracket axle and bearings) is correctly adjusted and
ght.
See bicycle mechanic for repair.
Frequency: as noted