Mongoose 6061 - Parts Maintenance

6 Maintenance
58
PARTS MAINTENANCE
Inspect Acon Maintenance
Tire Inaon Check re pressure. Inate re to the pressure indicated on the re sidewall. See
“Inang a Tire Tube” for more detail. If the re is at see
“Fixing a Flat Tire” for more detail.
Check the bead is properly seated while inang
or reng the re.
Reduce air pressure in the tube and re-seat the bead.
Spin wheel and check rotaon / alignment
is smooth and even.
Loosen axle nut(s) and adjust unl properly seated. If the hub
bearings need repair see a bicycle mechanic for repair.
Bead Seang Check for broken or loose spokes. See bicycle mechanic for repair.
Tread Inspect for signs of excessive wear, at spots or
cuts and damage.
Replace re.
Valves Check that valve caps are ed and free of dirt. Clean dirt from the valve.
Inspect Acon Maintenance
Rims Inspect for dirt and grease. Use a clean rag or wash with soapy water, rinse, and air dry.
Wheels Check the wheels are securely fastened to the
bicycle and axle nuts are ght.
Adjust if necessary and ghten axle nuts.
Spin wheel and check rotaon / alignment is true See bicycle mechanic for repair.
Spokes Check for broken or loose spokes. See bicycle mechanic for repair.
Hub Bearings Li each wheel and see if there is movement side
to side.
See bicycle mechanic for repair.
Frequency: Inspect and maintain at least each use.
Frequency: Inspect and maintain at least each use.
Tires
Wheels