Remote Control
NOTE: - The remote control should be directed towards the IR lens located on the front of the GSW12 cabinet. For distance and
angle limits please refer to the Set Up Guide (page 2).
1. Mute
Toggle between mute and normal operation. Mute can only be accessed by
using the remote control.
2. Power/ Standby
Toggle between standby on/off. Standby can only be operated by the remote
control unit. This function will not be operable when using the +12v trigger.
3. LFE
Toggle between LFE and Stereo input. The input mode can only be accessed by
using the remote control.
4. Night Mode
Toggle between night mode on/off. Night mode can be accessed by the
remote control and by the main control panel menu.
5. Movies
Toggle between movie mode and FLAT/ USER mode.
6. Dynamic
Toggle between dynamic mode and FLAT/ USER mode.
7. Music
Toggle between music mode and FLAT/ USER mode.
8. Impact
Toggle between impact mode and FLAT/ USER mode.
All pre-set EQ’s (5-8) can only be accessed by the remote control.
9. Menu arrow keys
Menu control and settings adjustment. The menu keys work in the same
way as the push and turn control knob on the main control panel. Volume is
facilitated by the up/down keys by default. Menu scroll is facilitated by the
left/right keys.
10. Enter key
Enter settings menu and select desired menu function for adjustment.
11. Exit Key
Exit set up menu. Press once for back a step and again for complete exit from
the menu system.
Monitor Audio 2007 GSW12 Rev 1
8
To Next Page
Loading...
Need help?
General
