Fixing the Radius 225/ Radius One to a Wall
Additional Points to Remember
• When using the wall fixing plate, the speaker will drop by 7.5mm due to the key hole
fixing.
• Templates are supplied with the products to aid fixing.
• The Radius 225 grille badge can be rotated, simply by applying some pressure with
your thumb/ finger and turning.
• Please allow no more than 100mm (4 inches) of excess cable protruding from the wall.
Any excess cable can be coiled inside of the terminal panel.
• Please see the template for suggested rubber foot placement.
monitoraudio.com
5
Cable Through
Hole
Wall Mounting
Point
Wall Mounting
Point
ENGLISH
To Next Page
Loading...
